➤ Sizes → 2 1/2” x 4” and larger

➤ Pressure Classes → ASME / ANSI class up to 4500

➤ Materials of Construction → Carbon steel (A105, A216 WCB) – standard, Alloy steel (F22, F91, A217 WC9, A217 C12A) – standard, Stainless steel (316H, A351 CF8M) – standard, Duplex steel exotic alloys, Other materials available upon request

➤ In Compliance → ASME B16.34, PED, Nuclear ASME III Class 1, 2 and 3, Nuclear Safety Related – 10CFR50 Appendix B, SIL

➤ End Connections → Buttweld – standard, Raised-face flange – standard, Other end connections available upon request

➤ Shutoff → Repeatable tight shut-off

✔︎ Integral metal seat
With our patented HVOF RiTech® coating process, the integral seat in ValvTechnologies’ rotary operating valves are resistant from the attack of abrasive magnetite or ferrous oxides in the steam flow.

✔︎ Body seal ring
ValvTechnologies employs a field proven seal ring technology to ensure sealing under all operating conditions, up to 1400°F. The body seal ring is loaded at a pressure higher than 20,000 psi. In addition, valves sized three inch and above contain a secondary Grafoil seal to further guarantee reliability

✔︎ Patented coating process
The sealing surfaces are overlaid with tungsten or chromium carbide using our exclusive HVOF RiTech® process. These surfaces have a hardness of 68 – 72 Rc to allow long periods of operation in the most severe conditions.

✔︎ Live-loaded gland area
The V Series gland packing design features a four stud, live-loaded assembly designed for heavy industrial applications. The packing material is high purity Grafoil® surrounded by carbon fiber / Inconel anti-extrusion rings. The six Bellville springs (per stud) provide constant load pressure through extreme thermal shocks and prevent wear leaks in high cycle service.

✔︎ Blow-out proof stem design utilizes a one piece, hard-faced, blow-out proof stem that is inserted through the inside of the body cavity eliminating the possibility of blow-out through the gland area.

✔︎ End Cap
ValvTechnologies design utilizes a end cap with a diffuser outlet with optional end connections.