✔︎ Output Signal
Measurement output:
4-20 mA on MSP422.
4-20 mA / HART on MSP400RH and MSP900GH.
Other output: Two relays on MSP400RH.

✔︎ Process Connection
2-in. NPT or BSP threaded process connections.
Optional flange accessories available

✔︎ Process Wetted Material
PVDF

✔︎ Housing Material
Glass-filled nylon

✔︎ Operating Temperature
-4 to 158 °F (-20 to 70 °C) for MSP422 and MSP400RH.
-40 to 140 °F (-40 to 60 °C) for MSP900GH.

✔︎ Operating Pressure
-4 to 44 psi (-0.25 to 3.0 bar).

✔︎ Compatible Devices
Mobrey MCU900 Series Universal Control Unit.

✔︎ Display/Interface
Standard integral push-buttons with LCD.

✔︎ Cable Glands
One off M20 x 1.5 cable/conduit entry on MSP422.
Two off M20 x 1.5 cable/conduit entries on MSP400RH and MSP900GH.
Ingress protection is IP 66/67 (when using supplied cable gland/blanking plug).

✔︎ Power Supply
12 to 30 Vdc for MSP422.
12 to 40 Vdc for MSP400RH.

✔︎ MSP900GH
12 to 40 Vdc (non-hazardous or unclassified area).
12 to 30 Vdc (hazardous or classified area).

✔︎ Fast fit and commissioning for reduced start-up costs.

✔︎ Minimal maintenance costs with non-contacting technology.

✔︎ Ideal for level, contents volume, or open channel flow applications.

✔︎ Two-wire loop-powered with Intrinsic Safety (IS) hazardous are certification.

✔︎ Routine level measurement up to 40 ft. (12 m).

✔︎ Local operator interface or remote programming

✔︎ Inert process-wetted materials for use with corrosive materials.

✔︎ Easy configuration with Mobrey MCU900 Series Universal Controller