TRANSMITTERS
Model X55-600 Series - Current to Pressure Transducer
-
✔︎ Supply Pressure
5-120 PSI (minimum = max. output +5 PSI)✔︎ Loop Voltage Drop
<6 Vdc (at 4-20 mA input)✔︎ Output Ranges
3-15, 3-27, 6-30, 0-60, 0-100 PSI.✔︎ Accuracy
±0.20% of span includes linearity, hysteresis, and repeatability✔︎ Zero and Full Scale Adjustability
>±12% of span✔︎ Input Range
4-20, 10-50 (switch selectable)✔︎ Unit Response Time
0.6 seconds to 95% of final value✔︎ Operating Modes
Direct, reverse, split range (switch selectable)✔︎ Vibration Effects
<±1.0% of span at ±1.0 gs from 5-2 KHz✔︎ RFI/EMI Effects
<0.8% of range with 5 watt transmitter at1 meter (20 to 500 MHz)✔︎ Shock Effects
±3% of span at 30 gs✔︎ Operating Temperature
-20º to 150ºF (-11º to 65ºC).
Operational low temperature version = -40º to 150ºF(-40º to 65ºC)✔︎ Temperature Drift
.01% of span per ºF from 30º to 150ºF(0.025% below 30ºF)✔︎ Feed Flow (Output) Capacity
3.0 SCFM at 20 PSI supply,
10.5 SCFM at 100 PSI supply✔︎ Bleed Flow (Exhaust) Capacity
3 SCFM (20 SCFM optional)✔︎ Pneumatic Connections
1/4” NPT✔︎ Electrical Connection
Screw compression (#30 to #16 awg wire) -
✔︎ Hard-to-Plug Design
✔︎ Low Air Consumption (0.002 SCFM)
✔︎ No Pre-Regulator Required
✔︎ Supply Pressure to 120 PSI
✔︎ Vibration and Shock Resistant
✔︎ Mount in Any Position
✔︎ 0.2% of Span Accuracy
✔︎ Reverse/Direct and Split Range Operation
✔︎ -40º to 150ºF Operation
✔︎ Standard 3-15, 3-27 or 6-30 PSI Ranges